Installing Weep Mizer on Coleman Self Serve Pump Stand

[Buzzie8]

If any of you Coleman customers have installed a Dixmore Weep Mizer on your self serve pump stand and you can respond to this post I made in the general discussion area it would be greatly appreciated. Here is the link to the post!

http://forum.autocareforum.net/showthread.php?t=2629"

 

[MEP001]

It should be a simple matter of adding a double-throw relay to use your existing solenoid. You could replace the solenoid with one that's normally closed, but you would lose the safety of the weep coming on in the event of a power failure. You'll need to run the wires currently hooked to the thermostat through the relay on the normally closed side, and use the weep mizer output to energize the relay.