Jeffhanson30
New member
What is a standard height for an IBA entrance? My current IBA has 7'2", should I increase the height of the entrance roof for newer vehicles?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
IBA entrance height
- Thread starter Jeffhanson30
- Start date
washnshine
Well-known member
I’d match the opening of my bay to what my machine will wash. No sense making the bay bigger if the machine will not allow. If you have a machine that will accommodate large vehicles, then I would make sure they can get in my bay.
My bay clearance arch is 84" and a few inches shorter than the IBA will take. I'd rather a customer take out the clearance arch than the machine, and it's happened several times.
84" clearance will wash a F350 4x4 without a lift kit, so I figure that will fit 95% of the passenger vehicles on the road and I'm good with that.
84" clearance will wash a F350 4x4 without a lift kit, so I figure that will fit 95% of the passenger vehicles on the road and I'm good with that.
