Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hydrominder U-Clamp
- Thread starter edredtop
- Start date
edredtop
Well-known member
Hi gang,
No takers yesterday so I fabricated them myself.
Previous operator hung the hydrominders from wall mounted outlets that I had to abandon and whoops, no u-clamps when I went to mount them in their new home. There are only three choices (that I found) if you need this part: buy a new complete hydrominder, buy the assembly Hydro Systems offers to KR that's not in stock, or buy a clearance item for $175.
Went to Home Depot and got it done for $45.
I'm afraid this event just elevated me to a Level 3 Hoarder.
No takers yesterday so I fabricated them myself.
Previous operator hung the hydrominders from wall mounted outlets that I had to abandon and whoops, no u-clamps when I went to mount them in their new home. There are only three choices (that I found) if you need this part: buy a new complete hydrominder, buy the assembly Hydro Systems offers to KR that's not in stock, or buy a clearance item for $175.
Went to Home Depot and got it done for $45.
I'm afraid this event just elevated me to a Level 3 Hoarder.
Attachments
edredtop
Well-known member
Thanks Greg. Unistrut sounds like a better choice than the square stock with perforations used here. It worked out great but would rather have drilled my own holes and tapped in the threads and not have to cut out one of the four sides.Very creative. I need some myself so I might copy this design if you have not patented it yet.
I wonder if stainless unistrut would work in a similar fashion.
Never leave home without it
