What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Dixmor LED 7 and Vac It Up

DiamondWash

Well-known member
We just recently installed our new faceplates from GinSan to replace our old Ryko Keypad style and they work awesome, but we are now trying to figure out how to get our Vac It Up system to activate with the first quarter deposited instead we have it tied to the Yellow Timed Hot which waits until the full amount is deposited before sending voltage to the Vac It Up timer to turn on. So my question is has anybody here integrated a Dixmor LED 7 and Vac it up to work together. We didn't go with Bill Acceptors just a coin mech and push-buttons. The tech that installed it was talking about one-shot timers and relays and was about as clear as mud to me what he was talking about.

GinSan GS-610.jpg
 
The two modern systems I've seen use regular vacuum timers to turn on the motor after every few pulses. You may need to use a relay on the coin signal for it to trigger two different timers, but that's not at all complicated.
 
Back
Top