Car Washer
Member
Just installed Crypto Tap Plus on my Wash Select II. I was able to get power to the Tap Plus. Taped a card to activate the wash. The Tap turned green as if accepting the card. The wash did not activate. It just asked for payment in the instruction window. The card was not charged for the wash. I do not have a cryptopay swiper or the old CC reader on the Wash Select II. I do have the tap Plus on all 6 SS bays and they are working flawlessly. I have Yellow and black wire giving power to the tap plus correctly and one red green wire going in the J9 coin three pin. Do I need to connect any of the other wires, or do I have it configured wrong on cryptopay site? Only configuration options are count up...count down...vend...or out of service. Tried both count up and vend and did not activate a wash.
