Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Connecting display to KR AT411
- Thread starter jfreak53
- Start date
I'm pretty sure you can't do it. Your going to have to replace the timer with a LED-6 or LED-7
jfreak53
New member
Figured as much but figured worth a shot in case I was missing something. Is there a simple led timer that can be activated with the output line when it gives power and just count that anyone knows of? Doesn't have to control anything, since I have controller, just a display timer that counts down when it gets power is what I envision. If not just wait till this dies to replace with led6.
You could probably make something work with an arduino and led display like a MAX7219. Don't know if it's worth the time and effort vs just replacing with a display timer.
Those 2 items plus a few relays and you could even make your own car wash timer. Would probably be worth it for someone who needs a ton of timers to develop their own
Those 2 items plus a few relays and you could even make your own car wash timer. Would probably be worth it for someone who needs a ton of timers to develop their own
