I recently had a customer ask me about a boom for a pressure washer, but don't have any experience with them. This is at a body shop that is not open to the public. It would be mounted to the ceiling which is roughly 25' up. This will be hooking up to their CAM Spray Pressure Washer. Any recommendations for this would be greatly appreciated.
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Boom Recommendation
- Thread starter BOM1966
- Start date
cantbreak80
Maybe I need new clubs
I sold 100s of these as standard equipment on new facilities and remodels. I’ve had them at my car wash for over 20 years. They survive use and abuse from the general public so, there’s that. They are reasonably priced and spare parts (if needed) are readily available.
https://www.kleen-ritecorp.com/p-7260-boom-360-rnd-mt-w6-solid-arm.aspx
It uses this inexpensive swivel
https://www.kleen-ritecorp.com/p-18973-90-degree-38-fxf-brass-boom-swivel.aspx
Or, even this with a street elbow from any hardware store.
https://www.kleen-ritecorp.com/p-1549-fluid-controls-ball-bearing-swivel-38fxm-brass-2000psi.aspx
Use that same swivel on both ends of the hose for user appreciation
I am not associated with Kleen-rite…I just use their easy-to-navigate online catalog for sharing the 411.
https://www.kleen-ritecorp.com/p-7260-boom-360-rnd-mt-w6-solid-arm.aspx
It uses this inexpensive swivel
https://www.kleen-ritecorp.com/p-18973-90-degree-38-fxf-brass-boom-swivel.aspx
Or, even this with a street elbow from any hardware store.
https://www.kleen-ritecorp.com/p-1549-fluid-controls-ball-bearing-swivel-38fxm-brass-2000psi.aspx
Use that same swivel on both ends of the hose for user appreciation
I am not associated with Kleen-rite…I just use their easy-to-navigate online catalog for sharing the 411.
Now that I have time to look more, when you say replace the hardware with Stainless Steel, could you explain this more please? I'm not sure exactly which part needs this upgrade. Thank you for your input.
