Bollard Repair

[Mr. Clean]

Looking for first hand solutions to repair concrete filled steel bollards that have rusted and broken.

Thanks!
MC

 

[Randy]

Cover it with a plastic Bollard cover https://www.bollardcoverusa.com/

 

[MEP001]

You can rent a drill that has a suction pump to lock itself to the ground and cores a new hole for another bollard.

 

[Mr. Clean]

Cover it with a plastic Bollard cover https://www.bollardcoverusa.com/

Forgot to mention, but we are actually replacing faded covers and that's when all of the rust was discovered. One of the guys got a little too agressive with the prep and now a couple are leaning against the building.

 

[Mr. Clean]

You can rent a drill that has a suction pump to lock itself to the ground and cores a new hole for another bollard.

Thanks! I will look into that approach. Hopefully, it's available in SmallTown USA.

 

[Randy]

We've straighten up a few that have gotten push over by putting a chain at the top and gave them a little pull. We seal them with foam in a can so they can't be lifted off and grow legs and walk away.

 

[Eric H]

I just drilled some holes with the hammer drill, pounded in some rebar, and used a new section of pipe I had laying around. When the concrete cured it was as solid as the original bollard. I covered it with a plastic bollard cover. No one will ever know!