What's new

Bay panels for IBA

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,264
Reaction score
774
Points
113
Location
texas
Tunnel friend of mine has too many bay panels. They're 14' x 16"! My IBA is 12' tall x 40'long.
Would those need too much adjusting on them? Can you saw off the top 2', or is that too difficult, &/or gonna look bad?
I'm thinking i don't really care what it looks like up near the roof...? But I have zero experience with these. He's willing to sell for half price, but I don't want them at all, if they won't work.

FYI: My Razor & SoftGloss are both already installed & working. Not sure if that changes things...?
 
Last edited:

STXCW

Active member
Joined
Jan 15, 2020
Messages
183
Reaction score
116
Points
43
You can cut them to size. We use a grinder with a thin metal cutting blade. To save money, use a j trim on top and bottom if he has some of those left over as well.
 

Greg Pack

Wash Weenie
Joined
Sep 3, 2007
Messages
4,095
Reaction score
1,715
Points
113
Location
Hoover, Alabama
i use a battery powered saw with a paneling bade to cut extrutech. Not much use for short cutoff sections except a few over the bay openings.
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,264
Reaction score
774
Points
113
Location
texas
Turns put they were 14 feet byb16 inches. I figured as much, but he had said 14 feet by 16',& i erroneously thought it was 16feet. 😰
 
Top