3/4" Pushlock Fittings

[Bubbles Galore]

Hi Guys,

For some reason all my print catalogs have gone M.I.A. on me in the past few weeks and I am trying to find some 3/4" pushlock fittings for my spot free upgrade. From my searching online at the different car wash sites, they don't appear to have a great selection for what I need. Is there a better place to look than our typical places (KR, Dult, Wind...)?

Thanks!

 

[Bubbles Galore]

So here is my own thread from a while back. It does appear as though McMaster does have the majority of what I'm looking for except for the 3/4" Hose x 3/4" Female JIC swivel. Will the 3/4" Hose x 3/4" threaded female swivel?

 

[MEP001]

Will the 3/4" Hose x 3/4" threaded female swivel?

It doesn't swivel once it's tight, if that's what you're asking.

 

[2Biz]

If your talking about John Guest push lock fittings for nylon hose, I get mine here.

http://www.freshwatersystems.com/c-460-john-guest-speedfit-fittings.aspx

 

[Bubbles Galore]

It doesn't swivel once it's tight, if that's what you're asking.

So these would by all rights eliminate the need for actual JIC fittings then?

 

[MEP001]

If your talking about John Guest push lock fittings for nylon hose, I get mine here.

http://www.freshwatersystems.com/c-4...-fittings.aspx

This is a push-lock fitting for hose:

The John Guest fittings are for tubing. Windtrax may call them push-lock fittings, but they are not.

 

[MEP001]

So these would by all rights eliminate the need for actual JIC fittings then?

I'm not sure what you're asking. JIC is a type of flare fitting that swivels only for assembly.

 

[2Biz]

This is a push-lock fitting for hose:

The John Guest fittings are for tubing. Windtrax may call them push-lock fittings, but they are not.

Thanks...I see now...I glanced at his previous thread and saw the John Guest fittings. I thought that was what he was referring to.