Search results

This am no presoak, air was down thought ok.. Got her running and no dice. Can't get any valves to open. When I test them the PLC lights up but I get no valves opening I assume no 24v output or a short.. This is not good... Going to get my meter as I left it at our shop.. If anyone...

On my ryko I've been fighting this issue lately. It's the Clear coat, dema injector - here no flow adjustment. Boost pump at ~ 200psi. There's no blockage into the chemical side. Or air leaks that I'm finding. When the solenoid opens to run it, it will draw up to 12gph for a few seconds...

We know we need soft water for presoak & RO process, but that seems to be all that is necessary for a good wash from what I can find. Currently all of my iba water is softened for high impact pressure (40gpm) and all my iba lp passes are RO. Presoak,wax,trifoam, rainshield,ect. With a...

Yeah so my machine has been set up to run clear coat after rainshield - surface sealant and its rinse pass. I know I've read cc is not needed.. Supplier says more protection is better.. I've been thinking about it for a while so I may as well open it up to everyone.. Is there any benefit to...

Years ago I had the idea to move from our float tank/flojet/ pressure injection into opposite feed inlet on a hypro pump. For our hp soap and wax... Hopeing to eliminate some equipment & problems by direct injecting with the zero pressure.. One reason is we experience a high pressure drop...

Hello, I've had an ongoing problem with this that has never been able to be resolved.. We've had it for about 14 years. On the wash that has just clear coat and spotfree, the clear coat starts priming when hi impact is at passenger rear corner of vehicle. So on the forward hi impact pass is...