Search results

everyone talks about flo jet pumps do you run them on all your services.and if you do which service does the pump last the shortest time

do all of you that use powder only mix it in a 55gal batch or do you mix it in larger batches. I have a larger tank up to 300 gal i can use.to mix. what are your thoughts on that? How far away are your hydrominders from your mixing tank?

It does not look like it has a insert in it but i will look at it and let you all know thank you

I have a tank that has a hair line crack in the threaded portion on the tank and am wondering if any one have had this problem and what they might have used to fix it short of replacing unit.

hello all Im trying to locate some wireless cameras that are 5.8ghz capable and if possible 110v powered. I have 2 installed now and want to put in 2 more on this system. I bought these about 1 1/2 yrs ago from rugged cctv and they no longer handle wireless. any leads would be great

I have a r bell cyclone automatic and im having a problem with the hose that connects the pipe from the trolly and the one coming from the commutater. The hose will blow about 1 inch from the fitting closest to the pipe from the commutater I am using 2250 psi hose with 3/4 male non swival ends...

are you looking to build new or a rehab? I have a 90' tunnel AVW equipment that I have for sale messge me if you are interested possibly

no luck on finding the keypad membrane for my savamco machine. So Im looking for anyone that 1 might have a whole unit to sell for parts or someone interested in my machine for parts.

running a little behind on replies but I got my floor heat fixed. I purchase a bottle of the product recommened on the forum and put it in my floor heat boiler system and ran it for 1 full day and shut it down. This winter I have not had to add any product at all. Just wanted to thanks to all on...

still searching for this part I'll post the part numbers from the book the keypad membrane # is 10-3209-1111 the control board # is 407733. I can get one made from united vending at a cost of 1500.00 for 1

update I have been in contact with jes at united vending and they are still in process of year end inventory and dont have the part and will not order anything till inventory is done another 2wks .I contacted cj at capital vending with the part# and he is working on trying to find one or adapt...

update I called capital vending and they could not help me. I looked at the membrane and got the number of the company that made the part and they siad i had to go thru savamco. I emailed them saying that savamco could not help me for the past month. Anybody have any other suggestions that might...

a good place to get the mirrors on line is partstrain.com

I have a savamco model 500 table top unit and Im need a keypad unit. Ive tried directly thru savamco for the last month to get one and cannot whether the are going out or not? does any one else have a savamco unit and run into this problem or know another source for parts for these machines ?

mine are plug in

yes it is a gs-60 board the green board that is on the bay door on the left side

I am looking for some g-60 ginsan timers for my bay doors.Ihave the 6x12 doors contact me with any thing you might have thanks MIKE

Im interested in what pressure you run your low pressure services at (presoak ,tire cleaner) i have replaced the check valve on my system and it still takes about 30 seconds for the product to come out. I run a flojet pump set at 60psi to pump the prsoak out.

my system has a 4way with air in the top pre soak and tire cleaner on the sides with a check valve after that just before the line going to the boom. A question on the check valve used there what type (cracking pressure) do you guys use there or recommend i presently use one that is 3-5psi...

I have a 6 bay and when the customer pushes either tire cleaner or pre soak it will take up to 45seconds for the service to come out properly.I have 1 check valve on the line that controls both services. what times do you guys have for these services to come on?.any suggestions to make these...