Search results

Livingston Industries built those as well as a 2 stroke Hypro mounted on top of a 15gal droom Toggle switch between wash and rinse.

After a closer look based on frame makeup and components used Try Windtrax in KC . That is very similar to what they used to build 20 years ago.

Then replace the sensortron. Sorry Out of service means the relay of the acceptor is bad.

If there is no-display and the Sensortron accepts coins. Then the LTT800 is bad. If it rejects coins check to make sure you have 24volts between the Yellow and Black wires of the timer or acceptor. If you have voltage on the wires you will need to contact KleenRite for the GT200 timer. First...

Where is you wash located? If you have interest in another quote, I have access to 2 new 360 Invert "L" and smart pumping self-service rack with low pressure FB & Triple Foam equip that would be around $260K plus insulation. If you want to update the Meters, Heaters, Softeners, RO sys I can...

My mistake on the email address "fat fingers" should have been sales@dwsequip.net . There web site is not working at this time as far as I know.

I forgot they have a new email address isales@dwsequip.net

Well IDX closed there door last December. Most of the IDX components are now sold through Kleen Rite, Carwash Super Store and Windtrax. However the Purmea switch PS300 is only available from DWS Dynamic Wash Soultions as they use them in their meter boxes. DWS is an equipment manufacture the...

Thanks for letting us know. Hope you are doing much better now.

You can leave your data open to whomever you want to see and copy it . But i am not loading my secure data on any phone ever again.

Personally, both my debit and credit cards do not have TAP. So a tap only reader is out of the question for me. that is why i chose Monex and readers at my wash that way so I can accept all cards. Personally, both my debit and credit cards do not have TAP. So a tap only reader is out of the...

Just another consolidation for the carwash industry. You are aware that in 2006 Osborne Coinage took over VanBrook as Virgal's health was declining. About 3 or 4 years ago Osborne was purchased by large European mint. Earlier this year Osborne was sold again to another European mint . It appears...

Here is the flyer on the mat weather tech mat cleaner if anyone is interested.

Has anyone seen the new mat cleaner that will do Weather Tech mats? I think it is by Automat washers

Kleen Rite or National Pride can get the newer MA850 or X12 repaired. Just call them.

You are looking for Dynamic Wash Solutions. Mos of the guys from IDX work there. They do not manufacture timers and coin acceptors but they do phone tech support for Kleen Rite and a few OEM's that have the marketing rights on the old IDX product line. You can call 870-862-3468 and ask for...

I don't have experience with Multriton. You have checked and made sure that no one else is using the same metal a different value correct? If it were me I would go to Keenrite and purchase their KR MA850 as it is easy to program in tokens with different values. The 850 has same footprint and...

Interesting ! Are you sending pulses or is the Monex connected via MDB? If you are sending pulses, then the WSII should react just like the coin acceptor. However, if you are also connected MDB it sounds like a configuration issue.

I would reach out to S Thomas in Irving TX. He does a lot of car wash decals especially D&H, Weben and old IDX . I bet he has some setup for Carolina Pride. try 888-869-699 or 972-445-1358

Thanks Will do.