Search results

So, my first week or so with Cryptopay installed in the bays, and I was anticipating this being an issue but when doing the reconciliation to your checking account putting in all those separate deposits that are being made on a daily basis is going to be a pita. I guess you could put them in as...

I have those same booms since 1994, in 2015 mine was leaking like that in one of the bays and I replaced the seals and it is still working OK. They are 1.5 od, 1.00 id, 1/4 thick. I got mine at bds-usa.net. You can also buy the springs from Kleen-Rite...

The HTP heater yo have, is that a 50 gallon? Also, how many bays are you heating with that?

Right, thats what i would think.

Thats what I have been set at, seems warm enough but I have been in washes that the swivel to the gun is so hot you cant touch it.

Putting in a new 119 gal storage tank, the old one rusted out, just curious what temperature you use to the bays, in your wash in a self-serve.

This is exactly what Nick at Dixmor said, I wanted to put it out there to see if someone else agreed with that statement. Maybe you could explain why it works like that. It may be because 6 and 1 on the led 7 are bugged together inside the dixmor.

there is no purple or blue on a sensortron. im getting different opinions from both ginsan and dixmor.

When hooking up a Sensortron to a LED 7, does it matter if you hook the YELLOW to hot on Dixmor and BLACK to common or if you do it in reverse order, YELLOW to common and BLACK to hot? The diagram on a sensortron does not specify which color is hot or ground, just shows yellow and black to 24v.

I used to sprinkle some calcium pellets, in each of the bays when it got really cold and if the pits were freezing. if your running your weep it will dilute rather quick.

I see what you mean, that does work, I thought the configuration settings for the cryptopay had to be the same as what was on the timer, so that does fix the problem and most that I said above can be disregarded, but it seems odd that you would have to set it up that way.

No I didn't know that.

After setting here for along time, it takes to 4:15 for cyyptopay to charge for the extra .25, so there must be some lag time on the internet for about 15 sec before your customers are charged for the extra .25, Sorry, I did more in dept transactions and don't want to lead anyone in the wrong...

With Cryptopay, I set it to $2.50 for 3:30 min, 25,21,10,10,100,0 from coin value to bonus time on led 7. I was at $2.00 for 4 minutes. If you put in $2.50 in quarters it will count down from 3:30 min to 0 for $2.50 and stop, if you swipe a CC with the same settings with count up, it will count...

I talked to cryptopay TS and whoever I talked to at first said it should not give the "free" 30 seconds, only to check with someone else and come back to say "that is the way it works", is the only answer I got.

Right, but if you stopped it anywhere between 5:00 and 5:30 it would only charge $5.

So if you set at $2.50 for 3:30 min. for quarters it would count down from that time then stop, but if you used a CC it would count up to 4:00 for the same price? Seems odd, but I guess you could use that to promote the use of a CC.

So I’m still in the process of setting up cryptopay and I am doing in my home to set it up before putting in the carwash, I have the price and time set up for $2.50 for 4 min, count up. When I let it count up to 4:01 min the charge is $2.50 all the way up until it gets to 4:31 then it will...

just tried it on a new led 7 with v7.36 software will only allow 31 characters including spaces.

OK, I see, I thought you meant that they were pulling in and driving off not even using your wash. I'm in the process of installing these, I can see that being a problem, so what do you do?, are these people calling and asking for a refund? The instructions a very clear and simple on how to use...