Search results

That look a lot older than a year old. I don't think Medeco lock housing on my coin vault heads look that bad. It looks like the plating process failed at some point. I some years ago that were made brass and then plated.

Do you have a picture of your doors with the remote display

Ok here’s my take on the car wash. $80K isn’t a lot of money. If you truly want to get into the car wash business buy it. This is what I would do. Clean to place up and I mean spit shine everything, new decals, new signs, new face plate on the ACW, new buttons on the ACW, Cryptopay Tap on the...

When we mix up our Correct presoak we use a plastic 55 gallon drum with a Barrel mixer https://www.kleen-ritecorp.com/p-2381-1-4-hp-electric-open-drum-barrel-mixer.aspx Along with a BN-Link Timer set to come on every hour and run for 30 seconds, this keeps everything mixer up. We use this...

As far as I'm concerned there is only one display timer and that is Dixmor.

The fan is a NMB MAT3115PS-12T-B30 there pretty easy to find online, they cost about $20.

We use JBS PC-100 Fonic wash, it has a fresh and clean scent but once it's mixed you can't really smell it, it's a pure white foam product. I've asked my customers if it mattered if the soap was colored or had a scent to it and almost everyone said they didn't care.

This is what I use. High pressure soap and Foam Brush JBS Fonic wash, 5 gallons mixed with 10 gallons of water. Presoak and tire cleaner, I use Simoniz Correct, 50lb box mixed with 50 gallons of water. Wax I use Simoniz Cherry Glo wax straight out of the 5 gallon pail. We've been using these...

I hope this is the repair kit you bought https://www.kleen-ritecorp.com/p-2125-hydro-systems-6655-p-hydrominder-valve-parts-kit-for-models-506-511-530-545.aspx Is you get the plastic stem reuse the brass stem, they are a better stem. We keep a few of the rubber diaphragms KR#IN665500

I have a customer who wants a used Hamilton DRS Bill changer, preferably with Mars validators. If anyone has one or know of someone who has one they'd like to part with let me know.

Turn off the air to your presoak system and then turn each one at a time and look for bubbles coming back into your presoak tank. I'll bet you have a bad check valve out in the bay where the air meets up with the presoak junction. Or go out in the bay with a ladder and disconnect the air where...

How old is this Hopper? How did you clear the coin jam? If it's dispensing more coins than it should you've got a problem with the Payout switch or with the brake on the back of the motor. Take the cover off the front of the Hopper, remove the baffle and check the switch at the top of the bowl...

The Flo-Jet G57 is a shelf priming pump up to 15 feet.

Once you get the mounting bolts out it should pull straight off.

We've had a few of these photo ops from time to time

What model Hamilton validator will Hamilton not fix for you? If it's a HVX or a STA your out of luck, parts are no longer available. My suggestion would be to go to a Mars validator if your not using Token notes.

Unbolt the pump, remove it and inspect the love joy connector, it's what ties the motor to the pump shaft if it breaks the motor will just run like your motor is doing. It looks like this https://www.kleen-ritecorp.com/p-8629-lovejoy-l095-1-1-8-24mm-flex-coupling-1-1-8in-x-24mm.aspx

This guy is full of more $hit than a Christmas goose. I roll laughing at some of these guys. There's another guy on Youtube, investment sometime, he's another one who full of $hit? I feel sorry for people who are falling for there line of bull $hit.

Thanks Dan, he's been calling around and that's what he finding out. I was just hoping that someone had one in there scrap pile that they pulled out to upgrade. This is another prime example of why you should not install bil validators in a coin box.

Been there and done that. You've got bad crankcase. I've got a Cat 310 that is banging that need to swap out crankcase