Search results

Which AMS vending machine did you buy? Your warranty issues should be with Rain Tunnel and not with AMS directly. Is the coin mech that you had to replace a Coinco? Did you have to give them a credit card number when you replaced the cooling compressor unit? The lights should be LED’s and should...

On our foam brush I use the KR #SWV38 swivel, they seem to work well. On our High Pressure gun I use the KR #SWV500 ball bearing swivel. I am not real satisfied in the longevity of the ball bearing swivel. After about 6 months or so the look like this

AMS makes a pretty good vending machine. Did you buy it from a distributor or directly?

That strong sulfur-like smell is probably Hydrogen sulfide, it put off the foul odor of rotten eggs or a sulfur smell.

It sounds to me like the genius who drilled the lock out also drilled though the lock and drilled out the plate that the Allen wrench fits into. If this is the case you’ve got a challenge on your hands. Sometimes you can get a large screwdriver to bite the disc that the locking pins are mounted...

To bad Scottsdale insurance isn’t licensed in Washington state. That's pretty inexpensive insurance.

In the last 2 years the car wash insurance game has gone totally crazy. Companies pulling over of serving the car wash industry. Those companies that have remain have raised there premiums. I had insurance with Nationwide for years though The Insurance center in Joplin Missorui, switched me over...

It'd take me about 5 minutes out an the door open. Before you do anything you want to order a couple more Medeco plug locks. You can get them from Kleen-rite https://www.kleen-ritecorp.com/p-963-medeco-plug-lock-and-key.aspx Or you can go on Amazon and search for a Medeco Plug lock, I just...

It's not to bad. Pop them out, sometimes you have to drill out the center.

We use white plastic drive rivets like these https://www.zoro.com/midwest-fastener-nail-drive-anchor-14-dia-34-l-nylon-100-pk-50195/i/G002528790/ You can also get the rivets at Home depot.

You don’t want to mount it on the building, like your old one. You want to mount the temperature sensor about 4 to 6 inches away from the building. I took a piece of thin aluminum about 2” wide and 7” long and bent it at 90 deg. drilled to holes it so I could mount it on the building, then took...

When was the last time you opened the door and wiped out the inside of the coin acceptor with something like Windex? Do you have the small screws in the door to keep it closed? We test our Slugbuster III every day with a nickel to make sure they aren't jammed up. You could give the Parker girls...

Also spray the lock down with something like PB Blaster or Kano Kroil penetrating oil, I gave up on WD-40 years ago . Don't put a pair of vise grips on the key you probably break the key off. Do you have the key number of the lock in case you have to get a new lock.

Has the Key ever worked in the lock? How old is the lock? Gently tapping on the key with hammer while trying to turn the key?

When my Zeirdan boom arms get bent will bad I replace them. They are 1" EMT conduit.

You made your offer and he refused it. Do not talk to him again, period. The next time he calls you and threatens you, call the police and go after him for harassment. He has no right to call your parents, your place of employment etc. Like ours have said block his phone number. When someone...

We use Cryptopay Tap plus. We took out the card swipers out and installed Tap plus, no problems, most every card around here has a chip on it.

It won't work if you don't plug the gray wire with power plug on it into a 110 volt outlet.

I'll work up a list of what you'll need.

Most equipment manufactures that I've dealt with use the brass manifold because they are cheaper. There attitude get the equipment out the door as cheaply as possible. Over the years I've replaced a number of washed out brass manifolds, never had a problem with the stainless manifolds or...