Search results

@Dick Nitro, any update on the new Nayax reader you were getting?

I would guess it all depends on how much of that amount is profit

Greg, looks like for Washworld in South Carolina, there are a few choices, like Etowah Valley, Power Clean and Howco

Greg, I know some old Power Clean equipment out of Sumpter, SC that I have worked on used that type of foam generator.

@TMoliver

"local company says it needs new motor, gearbox, encoder, swivel, and a bunch of small parts… decent bill." Sounds like parts changers instead of technicians.

@Gas biz, sent you a PM

Did you remove the green/black wire from the blue/black wire? How did you determine the motors are bad? You are getting V1 02 on the screen when the timer starts for a reason. I sent you a PM

@Wasking, any updates? Did you get it working?

I would unhook the motor starter wire at the starter, turn on a high pressure function and see if fuse blows. If it does, you got a short in the motor starter wire, if not, probably a shorted coil on the starter. Should be able to unhook wire from A1 and A2 on the starter and see if you get...

After reading @OurTown comment about you wiring in a new Led 6 timer and looking at this picture you posted, it sure looks to me that you have the blue/black wire (24vac timed load) tied in with the green/black (12vdc negative for a horn). If that is the case, that ain’t going to work.

My reply was to the original poster. Glad they are working out for you.

I can’t speak on the quality of the machine, but if you have no distributor support in your area, why would you want that particular machine?

Read the whole thread, Apw took his Monex reader out in January of this year.

Maybe Dixmor? What exactly is happening to the timers? I’ve had very good luck with the LED 7 timers.

Car Wash Equipment Transformer | Micron | B100-0585-1 (kleen-ritecorp.com) I can't tell for sure in the picture if the 24v hot wire is fused somewhere, but if definately needs to be.

Do you have a link to that power supply?

Keno, I'm a little confused, I understand about the relay and why it's needed, but thought the Nayax Vpos had two wires in the harness that powered the relay? What exactly is the power supply needed for? Only thing I can think of, is if it is on a vac that only has 120V and is needed to power...

When I had my two washes, all hydrominders had filter screens on the inlet side. Not sure why you wouldn’t have them.