Search results

That's why. If you're ordering 1-2 pallets, you're spending more than $1,250

Sent you a PM

Nice looking sign, ruined by a half a$$ wiring job. Some people take zero pride in their work.

At the end of the day, all that matters is, are you getting the vehicles clean. If you’re not, it doesn’t matter how fast you do it.

I didn't think Cryptopay was available in Canada.

I can assure you that you didn’t fix a Presoak running out of the wand issue by changing a foam brush solenoid. If you can do that, you better by a lottery ticket immediately.

So, the solenoid valve you had in your hand has nothing to do with the Presoak. They are used for the Soap and Wax functions. Look at the attached photo, you will see a plate with the label Presoak on it. There’s a black flojet pump under the label and to the right of it is a 2-bay solenoid...

How about some pics of the solenoid manifold/ equipment set up? Are you sure you installed new solenoid in the correct direction? Only way presoak can get from the chemical holding tank to running out of the wand, is it has to go through a solenoid that is not closing from trash inside of it...

5040 seems to work pretty well.

What did Cryptopay support say when you told them the issue you were having?

If he bought the new D&S IQ Self Serve, the chemicals would be ran through hydraflex injectors. @Gas biz, if you can tell us what color injectors you are using for foam brush and tire cleaner (white or yellow) and what color tip is screwed into the injector, we can tell you what dilution ratio...

Can your distributor not help you with fine tuning the chemical ratios for those products? For what you had to pay for that system, they ought to be able to help you adjust it down to an acceptable level.

Common is the terminal closest to the face plate. NO is the middle terminal.

So, your cable coming from your timer down to your coin acceptor should have one wire hooked to 1 on the timer, which goes to common on the cherry switch and one wire hooked to 4 on the timer, which goes to NO (normally open) on the cherry switch. Once you know that is correct, flip the switch...

I think you have it wired where there is a constant signal to the coin signal input of the timer. Since you have it set for one coin to start, when you power it off, you are killing that signal and powering it back on starts the timer. Usually if a timer is bad, it either won’t start or it...

Istobal does not have any manuals on this particular equipment, as the pictured equipment was never made by Magic Wand. CEO of Magic Wand does not work for Istobal and to my knowledge never has. There is probably a hand full of former Magic Wand employees that still work for Istobal.

Gotcha, that makes sense. I never knew you could pair the 2 like that. Learn something new everyday.

I assume you're talking about the standard tap and not the Crypto Tap Plus, since that is what you have installed at your wash and what you quoted in @Greg Pack post. If that is the case, are you saying the customer would have to tap their card and then swipe it to get it to work? What if...

@rshiggaon, do you have any pictures of your pump setup and/or pump stand?