Search results

Order one on amazon that links to your phone as the viewer and software. This is what i use. Its in sale now for $400. I have found so many uses since i got mine.

I had to deal with this last year at a site i took over in april. 1st if its leaking that much to be topped off daily id isolate which loop it is and turn it off. I started by turning off 1/3 of my loops and keeping 2/3 on. The second day of turning them off i had isolated the group it was...

Id have to look at my notes on how to do it but ultimately i decided to discard bonus time with the rising costs of doing business.

Its 2 degrees, If LL is set to 33 then it turns on at 32 and stays on until it is higher than 33(34), not 33 or higher.

We have been using Erie brushes for probably 20 years and have never seen an issue with brushes being defective, typically brushes being pulled from the head is if someone does something stupid (abuse) where the brushes catches on something and they jerk them. I typically replace all brushes...

4 per bay, approximately 20" in from end of each bay wall.

If the boxes are structurally sound a new decal goes a Looooooooong ways in freshening it up. I would personally look at retrofitting with a dixmor timer to update it.

I got the same kit, I'm testing the flavors as well. I know i don't like the gold, smell like the cheap colognes they spray in department stores if you ask me. I have to replace coconut and will most likely go with the Caribbean colada but haven't given it the test in the truck yet.

Not sure of your setup, but it be condensation on underside of the roof in the bay. As temperature increases the condensation burns off and doesnt drip onto the surface of the car. I know it happens from time to time in my self serves especially since i run hot water.

I usually replace check valves as needed, when one fails for a bay i usually go ahead a replace all of them for that bay. If i had it that far broke down id probably go ahead and replace just to not have to fool with it a week later after tampering with everything.

I was running 2507 at one site i reduced to 2506 almost 2 years ago (both at 1100psi). No complaints there. I took over another site in april 2023 previous owner was running 4004. Changed to 2505 (again 1100psi). Nothing but compliments about increasing the pressure for the 1.5 years.

Ceramic 1st then Graphene here

How many chargebacks do you get, I have 2 sites with 18 total bays, 17 vacs, and 2 ibas and 14 laurel vendors all with cryptopay. I get maybe 3 to 4 charge backs per year. I shrug it off and move on with the volume i move. Not sure what fees your paying for the chargeback but ive never had...

Id say youre breaking even at best at $1. Id look at it like this. If you go from $1 to $2 and half the people stop using them youre making the same money at half the cost. If youre not worried about profiting off of this and using it as a bone to throw your customers for marketing or...

I switched to the demas as well almost a year ago, was having consistent issues with the blue ones only lasting 2 or 3 months. I think i have replaced 1 of the demas in the last 12 months and that was on an alkaline base for the iba

we had a slant 360 from march of 1986 until december of 2018. Was still operational at the time of removal.

I have used them to issue a free wash in the event i cannot meet up with the customer to make things right...although this is very sparingly as most of the time they call and i remote start the equipment in another bay and the problem is rectified immediately. The more common thing i use them...

Right there with ya, alot of things are easier with "automation" but i dont need my phone telling me what to do. Thats why i work for myself.

4 per bay, (each corner) aprox 20 inches in from end if walls. This helps throw light into the parking lot. My other site has 12k lights (they have 2 panels with 6k per panel) those i have wired where 1 panel per light will cut off at 11pm, At 6k per light and 4 in the bays its plenty but...

You are going to have multiple pieces of equipement for SFR. You will have a RO system (produces the SF water), a holding tank (holds the SF water for delivery), and a delivery system. I have a 3000 gpd production unit and a 100gal holding tank at 1 site and a 6000gpd and 250 gal holding tank...