Search results

Great opportunity to install a new Clack brand valve.

I assume you mean a twin tank alternating softener, right? So you've put Tank 1 through a manual regen and each phase of the regen is working properly? Have you done any maintenance on the softener valve? What valve(s) do you have?

Out of a 1.5" pipe at typical pressures I'd expect 40 to 70 gpm. 65 to 120 gpm from a 2" 80 to 170 gpm from a 2.5" A quick and dirty calculation for flow from a pipe is diameter squared times 20, so for a 2" pipe: 2*2*20=80 gpm Russ

Depending on the valve you have on your softener, remember that may also be a tool you can use to log water use.

Same here

I've also had good luck with wet and forget. In this application it was algae growing on vinyl siding on the north side of the house. Been several years since I sprayed it and the algae has never come back.

GFA ELEKTROMAT SI 25.37-38,10 Built In Safety Break IP54 New With Damage  | eBay

No... but the government dolts were obviously having trouble managing the data they already have. They just couldn't connect the dots. We did that for them.

Just finished it. Not onerous, but still distasteful as hell. Come on, January.

No-name chinese knock off. No thank you.

Yes - there is a lot of Sch 80 in this facility.

Yeow. Home Depot and Lowes have salt for $6/bag by me. Tractor Supply is a bit cheaper.

That's just the way the manufacturer (Structural/Pentair in this case) makes many of their largest tanks. In some cases it facilitates plumbing connected to the bottom of the tank.

This recent industrial customer had very hard water, high flows, a high volume demand, and needed soft water without interruption. A twin tank alternating softener with 2" Clack valves was the solution. With 30 cuft of resin, each tank has a capacity of 900,000 grains at 15-lbs salting. The...

The primary advantage of a twin alternating configuration is that you get uninterrupted soft water 24/7/365. With a single tank soft water will be unavailable for about 1.5 hrs each time it regenerates. This can work well in situations where there is typically downtime in the middle of the...

Happy to give you a quote for your softener and any other water treatment supplies (e.g., RO membranes). Russ

In terms of water delivered to your RO system - it certainly should be soft. If you look up the feedwater specs on your RO system you should see something along the lines of <1 gpg hardness. You'll get much better life from your RO membranes with soft water, and you can reduce your concentrate...

You'll add salt probably once a day to once a week, depending upon your water hardness and the amount of water you run through it, and the size of the softener. All softeners use salt.

Often you can find the best price on salt at stores like Tractor Supply, or Farm and Fleet.

We size water softeners for car washes based upon a number of factors specific to your site. If you contact us to buy a softener we'd begin the conversation with these sorts of questions: What is the diameter of the pipe that will be connected to the softener? Do you have a specific gpm...