Search results

This morning our clean up employee walked into the equipment room and heard air hissing from the air compressor. The tank on the air compressor had a hole in the bottom of it. The tank has an automatic drain on it to keep the water out of it. We replaced it with 20 gallon Porter Cable from...

Thank you for sharing that information. I find to be very useful.

That's great. I'm pretty burned out and on the fence if I should get out or not. Best of luck. Can I ask how old you are?

Do you have a link to which pure sine wave uninterrupted power supply you installed?

You don’t want or need a regulator on the discharge side of the Flo-Jet pump. The beauty of the Flo-jet pump is whatever pressure you put into the pump is going to be your discharge pressure. I’d do what Randy said and put a regulator on the inlet side of your Flo-Jet pump so you can regulate...

We took over a car wash that has Dilling Harris coin boxes installed with Hamilton DTI timers, with Neuron surface mount credit card readers in the coin boxes. The coin boxes are connected to a Hamilton Dan system. A couple of the card readers don’t work. We called Hamilton and they said “Nope...

Thanks, I think it's about 40 years old. where's a good place to buy the 3/" black nylon tubing? Will be affected up in the attic by the UV rays?

I see a huge money pit. I think I'd look into replacing it.

I need to replace my 3/8" plastic Presoak hose, you look at it sideways and it'll break. It's not colored, it's kind of a natural looking plastic. What does everyone recommend?

Would something like this work https://www.harborfreight.com/all-purpose-mixer-41015.html?_br_psugg_q=paint+mixer

What does this retro fit kit cost?

That's a nice clean set up

Outside truck bay, BAD! idea. Been there and done that.

Hands down go with the Hamilton changer, they are a much better built changer.

I've been sending our Mars validators that need repair to Randy here on the Forum. They come back like new. If they just need belts you can do that yourself.

You didn't look to hard! It took me about 2 minutes and I found it...

We've had really good luck with the Jobe valve. https://www.kleen-ritecorp.com/p-27147-jobe-1-topaz-industro-hi-temp-float-valve.aspx#description We tried the DEMA 437 once and had the same problem your having.

Our foam brush hoses from the equipment room out to the bays have deteriorated to the point that they are cracking and leaking so it’s time to replace the hoses. The hose is currently 3/8” would a ¼” hose gave us a faster product delivery or should we stay with the 3/8’ hose.

We didn't have any freeze damage. We turned off the water, drained all the systems, blew them all down with air and then pumped RV antifreeze and windshield washer fluid into everything, turned on the gas heater and hoped for the best. We lost about 4 days of revenue.

Why don't you drill out the hole retap it and epoxy in a brass bushing or try to epoxy a bushing into the damaged port.