Search results

That was what started this was water in crankcase and put a new seal kit in it and replaced the wics.

Yeah it's number 99. Yes I do have to pull head off but I really think my torque wrench is wrong because 18 is so little.

On my automatic cat pump 3535 I put seals in it and one plunger retainer ring sheared off when putting it back on. I ordered new one and got it back together second car bam another one did exact same thing. I may have torqued them too tight if Wrench was wrong but? Anybody seen this before. By...

I just recently found some 4' water tight leds with 3600 lumèns for $79 at Home Depot. I replaced two 8' t-12 with them very impressed. We will see!

We'll I think I found the culprit I watched my teenage son put the O rings on under the ceramics it appears he did not get it screwed back on tight it slid right off. I'm lucky it didn't break anything. I'll be more hands on training next time!

Ok sounds good thanks!

Ok we changed all the head seals. My son and friend did most of the work I'm not sure about the crankcase seals do they come in the seal kit as we'll? If so then yes if not then they weren't replaced. If I remember correctly the only thing replaced on the crankcase was the rubber orings on the...

I just changed seals in my cat 3535 pump and after about 10 cars it already has water in oil everything appeared fine inside.... Any suggestions?????

I was recently talking to manufacture of my IBA and he told me that most new IBA do not use hot water anymore as the cost has just got so exspensive? I was thinking of dumping my boiler and putting a couple of instants on bays any ideas on the previous statement or am I being misinformed?

I had the same problem I did what has already been mentioned I have a big poly holding tank and it has done me we'll! Cfcw is spot on In his assessment in my opinion!@

Ahhh that's some good info!

Man I think you should call cryptopay to be sure but because of the input/outputs I don't think it's possible. But I could be wrong just ask my ex wife!

I know this has been discussed here at length but always like to have professionals throw there two cents (food for thought) I am considering the purchase of another location it currently is doing gross receipts of around 100k a year for last three years they are currently asking 375k 1. Does...

I'm going to give them a call again.

Boy that distibutor problem is a pain in the A$$. im considering changing my IBA because of same problem need part bad lag time manufacture wont sell to me! and I think info I get is half correct and half to sell me more parts gets ticked off if you buy anything from kleen rite but his parts are...

I have a combo shampoo/vac unit that Im having a little problem Im sure somebody on here has encountered. Inside the filter compartment there are ss screens protecting the motors from debris,however, I am having a problem keeping these screens lint free every few days they build up a lint cover...

Oh I agree waxman I just haven't owned this wash long so every week is the start of my trend but you are spot on!

Hopeful somebody can help clear this up! I have a automatic and when the car first pulls in it has a undercarriage wash it sprays and the pressure guage takes a second before it get up to 1000psi I think I heard the Unloader sounded like it was pushing what sounded to be air? Then when car...

We'll guess the price jump and everything went we'll after all not one person complained and bam HUGE week! All these upgrades seem to making a differance some have comment how they are seeing change and like it!

Oh i agree on prices I appreciate your opinion I figured the same and after I finish the remodeling next year I am planning on going up again others in area are higher for less time!