Search results

-Check Robert with Dynamic Wash Soultions Sales@dwsequip.net or 1-870-862-3468 . The offer a really nice system VMC systems that are tankless and you can set your pressures from as low 175PSI up to 1500 PSI on standard system, On board chemical injection set up for up to I think 18 different...

Keno is correct and you can also use one of the newer Monex readers as well which include timer output. However, my experiences with count up no matter which brand i have installed you need to have a relay to carry the load . I like using the GT200 or the larger GT912 as they have a bigger and...

If you have Monex of Nayax in package mode or multi pricing mode a $5.00 charge does not have to send 20 pulses it could be 19 / 18 or even 25 pulses. Thes 2 brands are smart that way. On both they can show the time given with each transaction. That is how to charge more per quarter than cash.

Sounds like pump pressure so check to see if the unloader / regulator is not sticking due to trash in it.

You might look at Monex and Nayax. they both have 3 in one card swipes, Mag strip, Chip and contactless. Much better than tap alone.

Why are you selling?

Did you start with a clean fresh container ? Some chemicals are not compatible. Even though both are for the same purpose. Seen gelling many time.

For me a petit it is over priced. Yes it is fast but those close to me just don't clean as well as the machines they replaced. One had an old DS that was on it last leg but it cleared my Jeep and my Van much better especially the windshield.

You are aware that it is recommended that a gauge top PSI needs be 2 times the operation PSI..

Guys, while researching the different models of China manufactured IBA's. I noticed that most of them call IBA as self-services machine. So some may be not comparing apples to apples but apples to oranges in this thread.

If you have the LTT800 that is a display model tied to a remote timer. If you have the LTT802 then you have the timer model. If the LTT800 is resetting then the issue is the remote timer. If the LTT802 is resetting then check the timer wiring harness for breaks in the power wires . Also you...

I had an old wash years ago that had the same issue. We found that the HP hose to each bay had broken down inside and soap, and tire cleaner was trapped in the walls. Had to replace all the feed hoses between the pumping rack and the booms. That fixed my problem.

Not likely. As You will loose a lot of security open source with credit card in play. If you find a solution let us know.

Check voltage at transformer. If it is 24+ then you have bad connection on a wire somewhere.. if it is 22 volts check your transformer how it is wired.

It has been many years since I tore down a 31DS . The difference if I remember correctly was the plungers were shorter and the crank slightly different ,everything else was the same .

My experience has been when the contractor hums is not enough current. Check the common side of the coil as well as the signal wire / hot .

Sorry to say not . Other things have taken priority like equipment orders. If you want to see some of the equipment Smart Rack or IBA glad to email Pic and shot videos

Sparky, if you have not bought your pumping rack yet. Contact DWS at 1-870-862-3468 and they will be glad to quote you a Smart Rack system VFD and tankless on both chemical and water

Call Robert or Mike at DWS.they do replacement door kits. There number is 1-870-862-3468.

The GT200 will count up in seconds when it sees power on the white wire time hot. You just have to enable credit. Depending on your credit card system you may need to add a relay to handle the load. When a customer cancels / stops the card session the GT200 will start the scrolling message.