Search results

that looks sexy!

I love retards like that

then they have to deal or find elsewhere to go. just focus on catering to the masses, that will make you the money. or you could build an outside bay with a tall boom.

$1250 from Hamilton

you have to set up another Merchant Id with Worldpay to use in your paystation if you use them for cryptopay. i got the new EMV reader for the HTK from Hamilton and installed it and Hamilton helped me set it up and im off to the races.

Fis worldpay. they work with most PayStation Mfgs. they also work with cryptopay. i use them for both my IBA and cryptopay in the SS bays.

yes to the AmEx and no to you not missing any others

i run them at 1400 and havent had any issues yet

right now i have 4 Paloma PH-24M-DNs. 2 for the floor and 2 for a hot water box that feed my self serve pumps. the heaters are failing and i just need to replace them.

spare parts make your break downs more bearable as you have a better chance of get things up and running on a weekend and vastly reduce your down time for that machine.

i think i have a brine tank issue just not sure just started to notice that it is using more salt than normal. not sure what if any problems that there are.

in short, i had Nayax and had issues with them canceling transactions cause it timed out. have them increase the time that it tries to connect to a minute. that seamed to solve the issue. plus i didnt like the fact that some cards you used the chip for american express and visa and others like...

my money would be on a flow issue when some of the first bays are going there is a restriction at the adapter and you have a pressure drop. i would suggest getting a block that is one housing or split the supply line to both blocks

i have 2 4k cameras pointed at my dumpster and if any dump i give the plate number to the police and for the first time have a nice chat with them and 99% of the time they dont do it again. but there was this one guy that did it like three times and we ended up "pressing charges"... well at...

dont know a lot about the freestyler or flex but i do know that you will get great tech support from belanger.

i did use it but it just cost too much IMO. i went with some local stuff and even though i have to have two separate chems not it is much cheaper and they do a better job as they are now blended for their specific tasks. even though the berry shine did a good job and you can use it for two...

cant you just replace the bags if they still work good or do you still want something more modern? if so, http://www.jeadams.com/Product/Combination-Units/20/Ultra-Series-Vacuum-with-Shampoo-Spot-Remover.aspx

you can build that cheaper with a raspberry pi. https://www.raspberrypi.org/products/raspberry-pi-zero/ https://www.raspberrypi.org/forums/viewtopic.php?t=20149 12 bucks and 15 minutes

thats was my stopping point with them too. the fees are really hig. think they figure that if you see the low price of the machine that you will assume that the fees are the same as the others around and end up getting hosed witht eh fees but you are now stuck with their solution.

so what are the fees that i dont see. i know they are there. every credit card processor has them. like what is coinless' cut per transaction?