Search results

Send them back to Magikist and get them refurnished.

Get out your volt meter and start checking the power from were it comes into the vac, to the transformer and to the timer and to the coin acceptor.Does the vacuum have a mercury relay or any other type relay?

My brother has a problem with people parking in the bays for hours on end. He installed a water line with a valve that he can control remotely that drips or sprays water on there car. It works well.

It could almost anything. Is the motor in the equipment room starting and stopping? Have you checked the wiring in the coin box for any loose or damaged wires? Rotary switch could be bad. Check the wiring on the pump skid for loose wires, primarily on the rinse side.

We won't be going this year. We've been to so many conventions over the years they just aren't that much fun anymore.

I must be doing something right because I almost never have a valve problem. I've never had a pump head washout.

If your currently using a LED-5 timer you want to use a LED-6 timer, they have the same footprint.

When you turn on the foam brush out in the bay do you get a nice foam out in the bay? How much pressure do you have on the discharge side of the pump? Is the pump drawing chemical to the foam brush manifold?

You want this Dixmor LED-7 timer https://www.kleen-ritecorp.com/p-1453-dixmor-timer-model-led7.aspx

You want this model LED-7 timer https://www.kleen-ritecorp.com/p-1453-dixmor-timer-model-led7.aspx The Dixmor LED-7 timers are repairable.

What do you mean it's not on warranty!! It should be, can't you extend the warranty a little bit.

If you look at the video very closely you see there is zero pressure on the gauge on the top of the outlet manifold. That tells me that the pump is not building pressure or it not drawing chemical from the holding tank. Check that you have chemical in the holding tank and that the pump suction...

Your link doesn't work. Is your Flo-jet pump pulling chemical from your holding tank. The pump will run it it doesn't have something to pump against.

You've got a bad timer. What kind of timer are you using?

Do you realize this post is 9 years old

The serial number is the date code when the Cat pumps are built. I'll see if I can find the pump I have that is a 31DS. The pumps at my car wash have a chrome head, they were made in 1982. So the 31DS with a brass head had to have been made before that.

Try this, disconnect the soap and wax lines from the pump and plug the ports and then run the pump, if the pulsating go away then you know the problem is in the soap and wax delivery side. Another thing you can try is to connect a city water hose to the pump water inlet and see if the pulsating...

I hate to see this, It looks like you might end up working for the landlord for free. That's thee problem with leases, your at the mercy of someone else. I have a friend in California that had that problem the landlords thought that they were going to get a car wash for by raising the lease to...

I live 150 miles from the Canadian border so we see a few Canadian coins every now and then. None of our Slugbuster II coin acceptors will accept them, they are rejected. What kind of coin acceptors is your guy using?