Search results

I have a check at right before my undercarriage manifold. If it is bad, a little water can pass through.

How much? Probably a lexair valve issue. Do you have a rebuild kit?

Thanks, MEP001

Folks I have gray and yellow stock prox switch cables in my LW4000. My spare stock are the yellow cables from Kleen Rite. My current cables have a bare ground wire, brown, blue, and black leads. The spare has brown, blue, black and white leads. Do I just follow the same color scheme with my new...

Does your machine do any other weird things? Are your front eyes turning back on after it passes the mid limit? Could it be the mid limit prox?

Folks, I purchased these. https://www.kleen-ritecorp.com/p-161-quick-disconnect-38-male-socket-ss.aspx Ever have any issues? Do they ever slip out of the connection? They look solid to me, just want to make sure they are good for bay use. Thanks!

I asked a tech at Cryptopay if they were working on an apple/google pay function. They said yes.

Dixmor LED6 or 7 seem to be the preference.

Folks, Wanted to replace the foot valves for my chemical pick up tubes. I bought the CV0063x from kleen rite. These will be fine correct? I have 1/4" IO tube feeding my injectors. These are 3/8" in w strainer, to 1/4" barbed out. Thanks for the help!

I installed led6s on all my vacs last year. They look great and have been super reliable. The customers seem to like them. I also installed two vacs out of my seven with cryptopay. Not the greatest but I like having the option and a lot of my customers do as well.

I have Att, but all my ip cameras were working fine along with my lasernet for my laser wash. I could also log on to the internet with no issue. All the while my site status showed no connection. All red. Very weird. All seems fine today. I am going to call CPay on Monday and see what was up...

Have you looked at your site status? I did have some purchases push through. My status as of this morning is good.

I have not. Tried calling. Sent and email. Hopefully someone gets on this.

Definitely an issue. Hopefully they get it squared away.

Folks, I was wondering if anybody is having coordinator connectivity issues today. My site, and another gentleman I know is having coordinator connectivity issues. Just checking in to see if anybody else is having this today.

I believe MEP001 is correct.

I have followed the model that MEP001 presented. Works great.

My stainless booms are close to equal height if not equal.

You should call crypto pay tech service. They are very helpful in diagnosing issues. That would be the best way to find the solution to your problem in my opinion.

Assuming your hp hose is the correct length, I would think it is a swivel or swivel alignment issue not allowing the boom assembly to track correctly. How old are your boom swivels? How often do you grease them?