This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Should be pretty straight forward as long as the Nayax device can manage holding the signal on for count up. The LED6 is capable. Should be two wires, 1 to input 8 and 1 to input 9 on the LED6.
We have seen this approach. So no drying option at all on the auto wash. The dryer is in it's own bay and they even charge for the service.
So the wash pkgs do not include dryer, but if you want the dryer, you can go through the drying bay and pay a little extra for this service...
Hello Minni1986,
Hardware cost depend on your site configuration (i.e. # IBAs, # SS bays, # Vacs, # Pet Washes, etc...).
No need to change your credit card devices as Touch4Wash will work along side what you have in place currently.
DM me if you want to explore further.
Would be good to check the Cycle inhibit signal coming from the wash to the ACW4. Check the connections to ensure the signal is making it to the ACW.
Might also want to check the cycle synchronization switch:
SETTING THE CAR WASH CYCLE SYNCHRONIZATION SWITCH
The Car Wash Cycle...
It seems very likely you have been living this already with 2 tunnels less than a miles away in two directions. If they have been there for any length of time, it seems reasonable that those that prefer tunnels are already using the current tunnels.
If that is the case, then the new tunnel is...
Hello Dick,
Happy to jump on a call to see how we can help you. I would recommend you add some ability to connect with your customers. This is what the tunnels do with their membership approach.
Even if you don't run a membership plan, it would be good to start capturing your customer info...
Yep, I am surprised by some of the hoops folks have to jump through to cancel a service. We have ran our program with the approach that matches the new rules from jump.
Man that takes me back! I had a 1968 Chevrolet C30 - 1 ton. Bucket of rust, but man could it haul. Motor was easy to work on and EVERYTHING was manual!!!
Car Wash Man, how many members did you have when you decided to pull the plug on the program?
How do you know the same folks are still coming to the wash and paying full price? Do you have a system to track this?
I shared this to a similar question on one of the car wash Facebook groups.
Some things to think about. Would you rather have a customer that is worth $130/year or a customer that is worth $300/year? Many articles have reported that the average consumer will wash 13 times per year. If you...
Have you checked the connections from the IDX 12 to the LED 6? I am not familiar with the IDX12, but the below shows the wiring and colors for IDX to LED 6 timer