Search results

use a g5700 flojet, a nc 110v solenoid for air to the flojet, a low water cutoff float in the reject tank, and a $10 suttner rinse tank float valve. you should have a low water cutoff float no matter which kind of pump you use. the reject tank will run empty sometimes. $150 or less in parts.

dultmeier lists those as strainers, part number: hy 3350-69

We need a breakdown of the utilities in order to help you more. I'm guessing you're paying about $950/ mo. water/sewer, $200/mo.gas, $350/mo. elec., $100/mo. misc. ($4,700/3 mo. equals $1500+/mo.) You can cut these some, but they're not what you need to focus on. Your gross is $3200, your...

I made the change to a foam tire brush a 18 mo. ago. I installed another 180 degree wall boom on the passenger side bay wall. The foam brush boom swings one way and the tire brush boom swings the other way. It works great. I used a different colored foam brush handle with a round brush head...

possibly too much "scrubby pad" in the foam generators. We just started up two washworlds and they would not foam properly. The chemical would stop drawing through the injectors after the first second or two. We did some tests and narrrowed the problem down to the foam generators. Took them...

I have been replacing only the capacitor first. I take it to my local electric motor shop and if it tests out weak or inoperative, then a $10 replacement capacitor does the trick. Otherwise, Dultmeier has good pricing on the ballast kits.

Just a clarification...Bancorp's flat .20 includes the flat fees on the interchange rate charts. They are simply 0.20 plus the variable interchange percentage.

I am currently deciding on a merchant service provider. Bancorp looks like they charge a flat .20 per transaction + the current "interchange rate". Doing some homework, I found Visa, MC, and Disc. each have a listing of their intercange rates. This rate seems to involve another flat fee plus...

The backlight is out on the entry wizard screen. Is there a repair that can be made to this on site, or does it need to be sent in somewhere, or do I need a new screen?

any advice on where to buy aftermarket or oem parts for wash wizard automatics. Jim Coleman Co. has priced themselves out of reality. Photo eyes costing a few hundred each eye is crazy. Most proprietary parts can be replaced effectively by common aftermarket parts. For those of you who have...

Buzzie8 had a post several weeks ago about underperforming wax on his water wizard. I have a customer with the same problem. He has tried several wax products, dilutions up to 25:1, throttling the pump inlet back, all with no success. My question is: He says the hp pump regulator bypass line...