Search results

I would never use muriatic acid straight from the bottle on anything.

I agree with Dirt. You need to see if this happens overnight when the freeze control is not on.

Bill you and Galen need to hug and make up. Every once and a while Galen had some good post on this forum.

I bolt mine to the floor. I put a piece of 1/2 rubber under the feet to damper the vibratrion.

I could fix you up with arch protector for a Laser.

There is a PDQ Tandem in my town that looks even worse than this when it's real cold. Nice looking wash with no doors. I'll post some pictures if we get more real cold weather.

Paul, It is really not a solid color it has a yellow hue and you can see the soap inside it. It is a tygon hose. I looked on the box today and got this info. www.Tygon.com Part# 4040-A .250 ID When you pull this web site up,click on the picture of the gas can. You can use 1/4 ID for the...

You can get a hose from your outdoor supply dealer that repairs outdoor equiptment. It is used primarily for gas lines. It will come in 1/4 inch ID(yellowish in color). You can get the 1/4 eductor kit and the tips for it from K/R. It has never turned black or hard with my presoaks and has never...

My locksmith recommended "Houdini" in an aerosol spray can. Works great.

I don't use nozzle protectors and have never had a complaint.

Pat, how's this wash doing?

With the one that pumps but no flow, cut the air off to the pump, drop the outlet line and then turn the air on and see if any flow occurs. I've had this happen before. It seems to be an air lock or something.

If you need a spare 620 let me know. Pm me.

Bubbles , I've got a couple of new plastic lens that I don't need any more. PM me. Wally

When it gets cold at night like we are gonna have this Fri. and Sat. night, I take the trigger guns off, drop the lines at the pump bench with the quick disconnect couplings, run some air through them, go over to the flow jet for the foam brush drop the inlet hose, attach a hose from a bucket of...

Don't forget a decal for the front of the changer

The thing I see wrong in the picture cwguy sent was not only the foot valve was bad but he is still using the old 1/2 hose. You need to change that out and get the 1/4 inch and you will be a lot better off. The 1/2 will give problems where it connects to the hydrominder because of the weight of...

Justin, don't give up to quick. Controllers are pretty pricey. Get with Randy he can help you through this. Those switches can be aggravating.

Chevron Turbine Oil ISOGST100. Get from your chevron dealer in five gallon buckets. About the same price as oil for your car. I`ve ben using this since the first oil was taken out of the pumps and some of the pumps are over 25 years old without any bearing problems.

Mf Banks I sent you a pm