Search results

Ryko has been producing brush machines for over 30 years and almost every model they ever made will wash over a million cars in its lifetime. Ryko's Foambrite brush material became the standard for the industry when introduced over ten years ago and has yet to be replicated by anyone else. Its a...

I just installed a rubber roof on my house by myself and it turned out great! We just did a reload (removing tunnels and installing rollovers is becoming popular) at a Holiday site and their bay walls were coated in fiberglass. It must be a different product since yours looks too liquid to spray...

Have any of you tried Rain Shield?

They are the same type of pump. Change the nozzles to increase the pressure.

Jim, These pumps are for high volume and the GPM are determined by how tall the pump is (# of vanes) and the motor size. I thought the pressure was always around 350 and it is the GPM that increases with pump size but I would have to research the pump itself to figure it out. I will try...

This is similar to what we use. Thank you for the info Earl, I think I will convert them to an electric valve and timer. Looks like you really have that conveyor speed cranking!!!!!

Ryko uses the Cat pump for the spinners on a Softgloss Max (I will have to look up the number). I somehow missed the second page of this thread. The ocillating sideblasters do work with the OHD or Radius high volume/low pressure High impact pump. http://youtu.be/bW5qMfjmx80

Its all based on how you handle the CC info. If you are storing any of it, you must have compliant software. You do not have to have broadband to be compliant with some systems. You must verify the card immediately and not "batch" settle. There is a lot to it and from what I have seen many of...

Replace it with the correct pressure "Pop Off" valve. The spring is weak and opens before it reaches the "safety limit" pressure.

Ryko is using a LARGE Cat pump for this. The customer had us plumb it to run a HP under car too.

I think I just found the valve in Sonny's catalog for 95.00. It says its for a Belanger or Hanna.

I am trying to find at least one company who makes this or parts for one. A spring loaded flapper opens the valve and an air pump and hydro-minder does the rest. I either want to fix this one or replace it with the same.

Parker engineering is right down the street from us and they are GREAT!!!! Call them for any help or advice you may need on their products.

I pick up ALL barrels (mine or competitors) when I make chemical deliveries. I combine like chemicals and make as many empties as I can. I move all of the pickup tubes to the barrel with the most chemical remaining. We make adjustments and Titrate when needed. If you are our chemical customer, I...

I found them here: http://www.internationaldrying.com/aboutus.htm

I am having a hard time finding World dryer on the net. I am pretty sure they are still in business.

I would test before you drill. Try and make it so both tires turn on the inputs at the same time.

We have a couple of those here, they will not fit.

You also need to turn the air down........

If your brushes are squeaking, you need more soap. The factory air pressure settings are great base starting points but it sounds like the high front air is set too high.