Search results

Thats the best set up imo. If you hop on top of the machine you will see some plastic tubes about 10" long. Trace back the tri foam hoses to figure out which tube is for the tri foam and disconnect the tube. This is the foamer which has either a plastic or steel mesh inside. Give it a good...

Sound like you have either a blockage or a kink in the pipe! Do you have just a long side pipe for the tri foam ir hockey puck nozzles?

I am guessing the 0.10 per wash is for friction. Do you know your touchless cost Mac?

Good question. I am looking at a pay by phone app with licence plate recognition and love the idea of the security risks and maintenance of handling cash being wiped out by going phone app/cc only.

I would love to see the Razor with either independent soap or wheel brushes. That would be a major improvement!

I change mine about every 15,000 washes or 2 x years.

Thanks Mac. Would you say the single step presoak is arounfd the .40 mark then?

you can get a pretty accurate app for your phone that can do this if you visit a site with a softgloss. I used this once whilst an expert was measuring the sound of a truck wash. My free app results were within 2 db of the experts results with his expensive sound gear

I tried ryko rain shield for a couple of years and thought it was excellent.

I dont have a view on bearing greasing but do know of another wheel supplier. It is xtreme wash gear from oklahoma! They supply many ww parts

I am in Ireland and the UK with washes but have mainly U.S touchless machines. The equipment is more expensive but far more well built in my opinion. I have never seen a good touchless wash made in Europe. For spare parts I find sparetech in France pretty good. www.sparetech.eu. I think in...

Hi, I am just looking at different presoak suppliers and am wondering what people are paying on a cost per wash basis and how much product is being used in oz. looking at single step and 2 - step for touchless iba.

What pre soaks are you using on your pdq? Also any idea on how much products you use and the cost per wash? Thanks for any info

Great thread Sooner. I am also keen to know as I am looking for a 30 day protectant that gives good water repellantcy in the rain.

Be sure to add a picture, review, location and opening times on google maps!

Could be a drive bearing collapsing and seizing, or gearbox seizing or the motor. You will need to split them all to know!

I personally would raise up the machine on blocks then run the motors one at a time. (Disconnect the motors at the vfd) You may find the outer casing of the suspect motor is corroded. Then replace the bad one. You may want to separate the motor from the gearbox also and try to turn the gearbox...

Im with Earl on this. I wouldn't use the presoak on the auto, but would agitate the rest and if the products have not separated, then give them a try.

I grease monthly and that seems perfectly fine. Most bearings are sealed so you are only greasing the bearing housing!

What about the Oasis eclipse for speed? https://youtu.be/SeEH17U0hfo I dont have one but hear good things!