Push Lok install
- Thread starter Noob
- Start date
PaulLovesJamie
rural 5 bay SS
I warm it up with a dewalt 20v heat gun.
I always use a Flare fitting on any component that I might have to replace or disconnect at sometime. Like on your air regulators.
https://www.kleen-ritecorp.com/p-65...ale-swivel-3-8-i-d-barb-x-3-8-o-d-sae-45.aspx
It makes life a little easier.
https://www.kleen-ritecorp.com/p-65...ale-swivel-3-8-i-d-barb-x-3-8-o-d-sae-45.aspx
It makes life a little easier.
water guy
Active member
No Brainer
Greg Pack
Wash Weenie
if the hose is fresh and pliable they go on easy up to 1/2". Once the hose ages and stiffens up they become more difficult. I've got some old 3/4" hose for spotfree in my IBA and they are nearly impossible to get on all the way.
DiamondWash
Well-known member
Have you tried talking dirty to it....LOL 
otherwise the very hot water/air idea has always worked with those fittings.
otherwise the very hot water/air idea has always worked with those fittings.
No, you need a 45 deg flare adapter.
3/8" Brass Flare Adapter | 30-243 | Barstock Flare Fittings | Kleen-Rite
The 30-243 is a brass flare adapter with 3/8" hose barb x 3/8" male SAE 45° ends. Used with push-on hose.
www.kleen-ritecorp.com
