amandersen
New member
- Joined
- Apr 3, 2024
- Messages
- 4
- Reaction score
- 1
- Points
- 3
Hello all, I’m new here. I purchased a car wash in a small town about a year ago and have so far been able to learn and fix all the problems I have had but the latest has me stumped. my auto bay has a rainmaker unit and it appears the backup battery in the plc went dead. When the lost power and then came back on all settings were cleared and set to zero. I can get everything to work except the tower will not move. I can manually move the tower by holding the tower move button and it will go all around and then send it home but it will not move when running a wash. Sorry, but I know very little about electronics of the beast all works.
I guess the question is 1st would anyone know what setting I am missing here? I do not have any kind of manual for the unit either, I found an old hydrospray manual online for a different unit and was able to steal some of the default settings. Would anyone have a copy of a manual they would be willing to send? I just don’t know what to do at this point. I have talked to hydrospray, but they couldn’t find anything or been able to help solve the problem so far. I’m sure it’s a simple fix but after 3 weeks I’m throwing in the towel.
Thanks, Aaron
I guess the question is 1st would anyone know what setting I am missing here? I do not have any kind of manual for the unit either, I found an old hydrospray manual online for a different unit and was able to steal some of the default settings. Would anyone have a copy of a manual they would be willing to send? I just don’t know what to do at this point. I have talked to hydrospray, but they couldn’t find anything or been able to help solve the problem so far. I’m sure it’s a simple fix but after 3 weeks I’m throwing in the towel.
Thanks, Aaron
