Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Waxman's latest activity
-
I would also contact any local operators who may find your location a good geographic fit. If they are interested in expansion it is... -
Waxman replied to the thread How to price and sell a wash..hire a commercial apprsiser. use the 3-5x gross income multiplier as a start point. talk to competitors and see if any may be...
-
Waxman replied to the thread Stainless Steel Mixing Tanks / Alternative."i'd love another helping of cocktail meatballs......oh wait; that's tire cleaner". just joking. cool idea!
-
That is normal. The hose shrinks, and worm gear clamps do not keep them tight because they do not have spring tension. I always have to...
-
Waxman reacted to Blanco's post in the thread Unexpectedly high water bill, has anyone seen meter over report due to air in the line? with
Like.
Also I believe the only way air can get into the lines is through repairs. It's not like anything is injecting air into your water... -
Waxman replied to the thread Arimitsu 516 chatter.well… This morning I reassembled the seals with O-ring grease, put the head of the pump back on, dropped a three-quarter inch rubber...
-
I should have probably mentioned, I have 0 experience with arimitsu pumps, just going off cat pump experience.
-
Waxman replied to the thread Arimitsu 516 chatter.I guess it's possible. I have removed all the inlet plumbing and thoroughly cleaned it all and reconnected using pipe thread compound...
-
Bumping this post for a possible aid. I still have a sporadic problem every few weeks/months (haven't tried the light bulb trick yet). I...
-
Waxman replied to the thread Arimitsu 516 chatter.it looks like my high pressure seal is two pieces. in the arimitsu video, the high-pressure seal looks like one piece. this is...
-
pump chatters when run normally. connecting a hose and spray gun assy to regulator ( eliminating downstream problem) did not change...
-
-
The swiper when not used is scrolling rainbow colors. Once you swipe it turns blue to authorize then either red if declined or green if...
-
Waxman replied to the thread Crypto pay vacuum issue.I went in to the configurations section and changed the parameters for that Swiper. I changed it to count up and then accepted the...
-
Since the swiper is only sending a pulse to the timer, it sounds like a wiring issue, voltage issue or a bad timer. The only time I've...
-
I installed some used Swiper's on my vacuums. They are crypto pay. I thought everything was working great until I noticed one of the...
