Thisguyswash's latest activity
-
TThisguyswash replied to the thread Help with cavitation after replacing seals and valves..Thanks for the link. I was able to review the pics and compare to my valve seats which do not appear to be affected by wash out. I will...
-
TThisguyswash replied to the thread Help with cavitation after replacing seals and valves..So I got it fixed tonight and it was the leaking soap solenoid! Hard to believe that such a small leak could cause all that. I guess on...
-
-
TThisguyswash replied to the thread Help with cavitation after replacing seals and valves..There is a tank below each pump that is fed by the hot and cold lines. The tank then goes to a ball valve and connects to a check valve...
-
-
TThisguyswash replied to the thread Help with cavitation after replacing seals and valves..I am not familiar with "wash out". Can you explain? Thanks.
-
TThisguyswash replied to the thread Help with cavitation after replacing seals and valves..The soap and wax are each pulled in via suction after being mixed with a hydrominder. The mixing happens in buckets on the floor, so...
-
-
TThisguyswash reacted to Yeti55's post in the thread Help with cavitation after replacing seals and valves. with
Like.
I just had a similar issue with one of mine , the check valve on the water inlet had something in it . Pulled it out and good as new -
TThisguyswash reacted to macswashrepair's post in the thread No HP Soap Or Wax Draw On Brand New Coleman Hanna Self Serve with Haha.
Oh sorry, to confirm I took Greg’s advice, haha
-
TThisguyswash reacted to cantbreak80's post in the thread No HP Soap Or Wax Draw On Brand New Coleman Hanna Self Serve with Like.
WHAT???!!!??? You mean I was finally right about something? Can't wait to tell my biz partner! (He won't believe me.) :ROFLMAO:
-
TThisguyswash reacted to macswashrepair's post in the thread No HP Soap Or Wax Draw On Brand New Coleman Hanna Self Serve with Like.
Restricting the water inlet did it. Thanks fellas. Always something so simple.
-
TThisguyswash reacted to cantbreak80's post in the thread No HP Soap Or Wax Draw On Brand New Coleman Hanna Self Serve with Like.
Try this... 1. Secure the gun with the trigger open 2. Select Soap 3. SLOWLY close the pump's water supply ball valve until the pump...
-
TThisguyswash reacted to Greg Pack's post in the thread No HP Soap Or Wax Draw On Brand New Coleman Hanna Self Serve with Like.
I've never worked on one, but I'm assuming it needs some vacuum in the suction line to work. I would try slowly cutting off the water...
-
TThisguyswash replied to the thread My second most popular vending item is.Exactly the same for me.
-
TThisguyswash replied to the thread Help with cavitation after replacing seals and valves..Thanks. I did notice that there is a slow drip from the adjustment screw on the soap solenoid. Could that cause this?
-
TThisguyswash replied to the thread Possible to get an email or text if changer is down?.I do this with a cheap PTZ camera in my changer. It's programmed with three positions, one to see the LED to monitor for errors, one to...
-
TThisguyswash posted the thread Help with cavitation after replacing seals and valves. in Self Serve.Hey everyone. I am a relatively new owner of a two bay self service wash and am having an issue with cavitation. My bays use belt driven...
-
