Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Randy's latest activity
-
RRandy replied to the thread Vibrating and no pressure wash..Unbolt the pump, remove it and inspect the love joy connector, it's what ties the motor to the pump shaft if it breaks the motor will...
-
RRandy replied to the thread Prospective 1st time owner - where to even start?.This guy is full of more $hit than a Christmas goose. I roll laughing at some of these guys. There's another guy on Youtube, investment...
-
RRandy reacted to Blanco's post in the thread Prospective 1st time owner - where to even start? with
Love.
Your favorite Dan. About 15 minutes of counting cash and playing with quarters. -
RRandy reacted to Dan kamsickas's post in the thread Prospective 1st time owner - where to even start? with Love.
There was one young lady that had a decent presence that ultimate lost the site to the bank in under 24 months. My favorite are the ones...
-
RRandy replied to the thread Help! Ginsan face plate wanted.Thanks Dan, he's been calling around and that's what he finding out. I was just hoping that someone had one in there scrap pile that...
-
RRandy replied to the thread cat 5CP is loud and makes a banging noise!.Been there and done that. You've got bad crankcase. I've got a Cat 310 that is banging that need to swap out crankcase
-
RHelp! I have a friend who had a face plate stolen from his self-serve bay last night. It’s 2005 era Ginsan coin box. Ginsan is saying...
-
-
RRandy replied to the thread Weep system.You more then likely have a solenoid valve problem. Try turning off your weep water supply and see if stops. I have solenoid valves on...
-
RRandy replied to the thread quarter/dollar coin abuse.I’ve been in the Bill Changer repair business for a long time and I don’t know of a bill changer like what Keno is talking about. Do you...
-
RRandy replied to the thread Graffiti Removal tips or tricks.You can try some graffiti remover and then hit it with a turbo nozzle at about 3000psi and it might take it if off. Your going to have...
-
RRandy replied to the thread Obsolete Gold Line with dial up.We no longer have card swipers. We took them all off and replaced them with Tap and pay, forcing the public to use card chip or there...
-
RRandy replied to the thread Programmable LED Sign.14 inches X 77 inches isn't a very big sign. Where do you plan on putting this sign on your car wash? We have a digital at one of our...
-
RRandy replied to the thread Bay starving….I've seen it a few times over the years that you get a 24 - 28 volts but you don't get enough amperage to fully open the solenoid. It's...
-
RRandy replied to the thread Bay starving….Try switching the hoses around so the Hot is on the Cold side and the Cold is on the Hot side of the Dole valve and see what happens. Is...
-
RRandy replied to the thread What is this vacuum part?.That part goes in the hole under the motor.
