Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by PA CW Tech

  1. P

    lacquer thinner to clean walls

    Purple power, greased lightning, any degreaser with sodium hydroxide or potassium hydroxide mixed in a 5 gallon bucket with hot water at 50/50 use a brush on a pole to apply it when the wall is dry and it should come off with a garden hose rinse. Kleen Wall is an awesome product for following...
  2. P

    Fluctuating Conveyor Speed and Timing Issues

    Where is the pump with the pulse prox plumbed in line? This sounds like an issue I fixed 2 years ago. Someone put it after the conveyor pump on the return line instead of inline before the conveyor. Had another site that had the pulse switch wiring routed through the dryer control and it...
  3. P

    Oil in pits?

    The peatmoss product is branded as NaturSorb or Bio Matrix Gold....amazing product. Absorbs all sorts of chemicals.
  4. P

    Belanger E300 problem

    On the plc there is a tini tiny switch by the plug, make sure its set to run and not stop...found this same issue several months ago.
  5. P

    Prep Gun Pump Issue

    Perhaps the issue is needing check valves on the individual outlets off the pump since the trigger to this starting was the 3rd gun that is 8' lower than the pump. Sorry to hear your company takes a "wait til it breaks" approach to caring for their investment. How often is your preventative...
Back
Top