Recent content by Losito

I have two self serves using a Mark 7 that I bought new in 2020. On one of the bays I randomly loose high pressure and low pressure when a customer is using it. I get an NST code on the drive. This apparently is a condition not a fault. Hafer group techs, have called Mark 7 but have no idea why...

Belanger figured out the issue with the water heater, the soap is coming out hot now. This has definitely helped tremendously. The fix was a single wire, it took 2 seconds. This was not on the manual.

I agree, I just opened this site. I need to make some money 1st.

12 grains.

Does the place have a touch free In place? With dryers?

The reason I bought the kondor is because I built the express tunnel in the same location using equipment from Balenger. I have another express tunnel and I wanted the parts to be interchangeable. The installer was able to give me a faster install with the kondor. So the Kondor was about 80k...

Www.AutoSpaXpress.com

Each bay does about 1200 -1500 each month. In this location I also have a touch free and an express tunnel. Vacuums are free, most of the income on this location is from the tunnel. The self serve are less than 5% of the income in this location. These are my only two self serve, so far it’s been...

Big Bang is the chemical, low 1st than High. I did have the rep come out to measure and test the output. I do not have the rocker spray, only undercarriage. I’m doing 1 pass of low and 1 pass of high ph. 10 second dwell on each. I am not heating the small tank. Belanger can figure out why it’s...

Hey, i am a real estate investor too. I bought my 1st wash in 2018. Looking at the pics, I would buy that place with the intention of replace everything. Trying to salvage and repair old equipment is expensive and you will continue to experience problems as you go. What you are buying is a...

I bought a new single arm Kondor. The machine is working ok, I’m using all Simoniz chemicals. Cars that come in some what dirty, are leaving with a visible layer of dirt. No matter what I try, I have up the chemical, dwell time and it’s not working. I also slowed down the passes with the high...

Hey, I bought one 6 months ago. I had the Belanger guy install the machine and 3 sonnys blowers for 130k. I did the electrical, signs, pos, and doors were extra. I’m truly not impressed, a bit disappointed. It’s my first touch free and I truly think there has to be something better out there. I...