Recent content by Kurt

Etowah
  1. K

    Blowdown instead of weep water

    They have been around- but they don't all work well under all conditions, especially if you don't have doors in Northern Ohio. You also have to take certain things into account- such as stacking, what to do if the normal wash cycle is interrupted (ie: impacts), etc. All of these seem to have...
  2. K

    presoak order for touch free

    I've done a lot of playing around with chemicals over the last couple of years. Here's a little of what I have learned: 1. For MY area (ie: dirt types in my area) LOW-HIGH has ALWAYS worked better no matter what the chemical salesman tells you. You need to experiment for your conditions...
  3. K

    Low pressure rain x for Laser 4000???

    We use a little ad-on PLC to get an additional LP pass. Wash one does Rain-x and wax, Wash 2 does just wax. I use the drying agent solenoid for the Rain-x. Kurt
  4. K

    Blowdown instead of weep water

    My distributor has come up with a reliable blowdown system for our 4000s (I would imagine M5s also). We installed one on one of our 4 bays, and it works well down to about 15 degrees F. Based on our calculations, payback is within 2.5 months! We have ordered the system for the other 3 bays...
  5. K

    New Check Valves

    Raisetheprice: switch your gearbox oil to Amsoil Severe Gear 75w90 synthetic extreme pressure lubricant and you will significantly reduce your gearbox problems. Kurt
Top