Recent content by kkewashsystems

Etowah
  1. kkewashsystems

    Arm rotation

    In low voltage systems, on which the sensors run on either 12 - 24 V DC or AC, it is always a good idea to ground the shield of the shielded sensor cable. Grounding helps in reducing interference especially when the control system is not located on the Gantry. Glad that teh issue was resolved !
  2. kkewashsystems

    Arm rotation

    Hey Mick! Hope you have solved the issue by now, what was it by the way?
  3. kkewashsystems

    Fired a customer yesterday

    Washing and Cleaning are always subjective. Clean to one person may not be clean to another. Hear the customer out, mostly they just want to vent out somewhere and usually it is the person on the ground. If the customer washed 6 vans, didn't he notice the cleaning issue in his first van? Most...
  4. kkewashsystems

    Will cleaning the floor mats damage them?

    The rubber or PVC mats can be washed without any issue. Premium cars with carpet mats should be only vacuumed and washed once in a while.
  5. kkewashsystems

    touchless or friction

    It mostly depends upon the market where you are based. Is it that the soil contents are difficult to remove by touchless alone? When the silica levels are high in the dirt on the vehicles, you have to use more aggressive chemicals and of course that makes the costs of the chemicals go up. If...
Top