Recent content by Jap

I have all runner and plastic lines but I’m getting trash on the same bay that had the oring in the check valve. It keeps stopping up my tip in the bay. I’m guessing it’s stuff that has passed from the unloader? I have took the tip off and ran the bay to try to clear it but it has happened...

I’m headed back that way I will check the crank case and measure the oring

This o ring was in one of the pump head check valves not real sure where it came from but thinking some how from the regulator/ Unloader I removed yesterday

Again! Got bay 1 bay up now bay 2 is pulsating when I hold the wand it work but the pressure drops to 5-600 when I let off the pressure builds up to 1200 any clues

I was there this evening and it ran great for about 3 and 1/2 minutes then started hammering. I am going back early to swap the regulator and see if that fixes it. Thank you all for all the help and advice y’all are giving.

We just changed out the accumulator and it’s still doing it any clues

Another ? My nitrogen bottle, ball accumulator on pump one is acting up as soon as you left off of the wand it is tat,tat,tat and want stop until I push the wand again

Next ? How do I keep from getting my vac hoses ran over and broken?

I have order new booms, Wanda, bay meters with CC payment, brushes and plan to ad triple foam presoak. Some new stickers also to liven the place up I hope.

I am from Gibson GA I’d like if I could get someone out to help.

That’s it

They are used to meter the HO soap and HP wax

Date he wrote

I’m not real sure I know it is a Kleen rite product and it is blue. It has been there for almost a year according to the he wrote on the top the labels are worn off

I also put a green orifice in the HO soap to get it a little better he had a pink witch was next to the smallest he could have