Recent content by HighOctane

I’ve got a Rowe bc1400 with a mars conversion on it that’s having an issue I’ve never seen before. The changer will take a $5 bill, not pay out the coins, and then the light on the bill stacker will flash twice and not allow any other bills. I don’t get an error on the control board. Any ideas...

Ok gotcha. I use AR North America VRT3 unloaders. When I am setting the pressure (with the trigger pulled) the needle on the gauge moves freely and will go up to 1500+. When I release the trigger, the pressure will consistently jump 500 psi regardless of the pressure I just set. Usually when...

Yep all the unloaders are the same brand and max gpm; I did notice that some of the new ones I've ordered have an increased pressure rating. Were the unloaders the issue for you?

Hey y'all; I was wondering what the pressure differential should be on a cat 310 when the trigger is pulled vs. released. I've got two pumps that have about a 500 psi difference - the rest of my pumps are closer to 200. I haven't noticed any issues; I set the pressure with the trigger pulled...

Unfortunately yes; I’m in Denver

Yep we’ve got cameras and have contacted the police - nothing they can do

Wondering if anyone had a solution to a problem I’ve been having. Some druggie keeps coming onto our property and cutting open the vacuum clean out doors to root through the trash and look for loose change. He’s hit us 9 times in the last 3 weeks. I welded on some L- shaped pieces of steel to...

It ended up being a bunch of knotted Teflon tape that had come off a fitting and lodged itself in the lines between the pump and the unloader- pretty rare issue, never seen that before. Usually if I have this problem I check the valves. If the wicks aren’t oiled enough sometimes a small piece...

Great thanks!

I run a presoak from a local soap guy, never had any issues. Today one of the wires to my solenoid came loose and caused the low pressure to run without air, just water and soap coming out. It was a very easy fix. Apologized to the customer and payed for the rest of his wash. After he finished...

I have a problem with one of my bays that’s stumped me. When the pump is running, the pressure shows 1600 PSI, when the trigger to the gun is pulled the psi drops to 800. After changing the seals and valves with no fix, I put a brand new head on. I’ve also put a new unloader, new pressure gauge...