Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
HCCW's latest activity
-
HHCCW replied to the thread Bay starving….Oh! So even though my volt meter was reading the correct voltage, the rotary dial still could’ve been the problem? I don’t know if I...
-
HHCCW replied to the thread Bay starving….This is the first time I’ve had it happen if you can believe that. And this switch was the original one!
-
HHCCW replied to the thread Bay starving….There are no check valves before the hot and cold water valves - just one after the tank on the hose feeding the pump. I think you are...
-
HHCCW replied to the thread Bay starving….Sorry, I meant to reply directly to you but I think I did it wrong: lol! My tankless heaters can only put out 3.5 gallons per minute...
-
HHCCW replied to the thread Bay starving….lol! My tankless heaters can only put out 3.5 gallons per minute. They have been inexpensive to run and been bullet proof for 26 years...
-
HHCCW replied to the thread Bay starving….Shoot! I should’ve taken a picture while I was there. I’ll screen shot a picture from my cameras, but the cameras in the equipment room...
-
-
HHCCW replied to the thread Bay starving….The only solenoid I have is right before the tank. It’s two sided, one opens for hot and one opens for cold. So there is no solenoid...
-
HHCCW replied to the thread Bay starving….I love all this discussion, it’s helping my brain work. My self serve bays each have a single tank/float each that handles both hot and...
-
HHCCW replied to the thread Bay starving….I didn’t switch the hose out, but I did switch to hoses and a water heater from an adjacent bay that is working fine and the same...
-
HHCCW replied to the thread Bay starving….It followed the hot water. It’s Fed by a VFD Grundfos pump out of a 300 gallon holding tank. That pump/tank feed all the bays and only...
-
HHCCW replied to the thread Vibrating and no pressure wash..In my 26 years running self serve car washes, 99% of the time these symptoms have been from a blown low pressure seal. This is the...
-
HOk guys, I am stumped. I have run the same self serve equipment in all of my car washes the last 26 years, and usually the mechanical...
