Recent content by Darrell

I would find a car wash close to where you live, contact the owner and see if he would show you around his facility. Tell Him what your wanting to do and maybe he wouldn't mind showing you what all is involved in a complete system. Just remember that you might run across someone who doesn't want...

My distributor said I couldn't do anything about it . But I'm not that dumb . All I was wanting to do is delay when the product starts, not delay the gantry . A simple timer should be all that's needed to accomplish that

Best thing is buy a Hach 5b hardness test kit. So you can test it yourself anytime you like .

First thing I checked was voltage, I'm hoping its just a bad batch of coils .

Is there any way to change dwell time for the triple foam on a D&S 5000. It seems to take too long just shooting out foam at the front of the vehicle before the gantry starts moving. I've been told by the area D&S rep that there is nothing I can do about it, but at the least I'll put a delay...

There is 56 of these coils on this stand and about half of them have been replaced. It appears that CFA has changed their manufacturing process. I can look at the older coils vs the newer ones and see a difference in the form they are molded with, it's only the newer ones that seem to not last...

I was figuring it would be best to swap to a different brand. I have replaced enough solenoids in the last two months to pay for new blocks and solenoids !

I am just wondering if anyone is having trouble with the 24 volt coils from KR that are for GC manifold blocks. It seems that I am having to replace them way to often and was wondering if I have a bad batch or if I need to change out to a different brand of manifold and coils . I have checked to...