Recent content by Clean Days

I found a used ACW-4 that has not been retrofitted for CryptoPay and I just installed it but I had the same problem. So I have shipped the control board that Steve provided back to him so he can test it to see if that might be the problem. My hope is that he finds a problem with his board and...

It looks like the CP has a red with green strip wire coming off of the card swiper and ties into the pink wire coming out of the ACW-4 controller. That pink wire goes into the controller one way and up to the blue wire on my slugbuster the other. The new Nayax retrofit ties onto that same pink...

Steve and I have talked several times about it and he has been great. Steve and I have talked several times about it and he has been great, we just havn't solved this problem yet. Were your acw4 and acw5 previously retrofitted for CryptoPay before retrofitting them for Nayax? I am thinking...

Do you think that the regulator has to do with the new display that is installed with the CryptoPay retrofit?

I am changing my ACW-4 from CryptoPay to Nayax. I installed the Nayax retrofit kit that I bought from CWS ( Steve has been great). Although we are struggling to get it to work. My current ACW was retrofitted for the CryptoPay and we are thinking that is the problem on why the Nayax retrofit...

Nayax just confirmed that they sent me the wrong cable. I tried to move the green wire but I cant get it out without ruining the plug. They are overnighting me the correct cable so I will have to wait until I get the correct one. Thank you for looking into this for me, the pictures is exactly...

ahh, okay. What slot is \the green supposed to be in?

Great! can you tell, is the (2) red, (2) black and the green landing on the same pin on each connector? They look close but I can't tell for sure in the picture.

I am sure that you are correct. Not that I am digging into it I am pretty sure you are right. The connector that goes onto the reader is the same on both cables, so I am hoping to find out what color of wire on the cable that I received is the pulse because it doesn't seem to be the green like...

I recently purchased Nayax VPOS touch credit card reader. We had a simple swipe before with World Pay and decided to change them out for Nayax. The wiring I thought would be pretty easy since I had an existing CC reader but it doesn't seem to be the case. On the Nayax there are (2) 24v +...