Recent content by cfdetailing

Did you figure out your problem? Mine is doing drive return timeout and I'm lost

Hey all. I'm looking for someone who knows the futura millenium ancient workhorse. I'm having an intermittent issue with mine. When a large truck goes through mine, the machine is erroring and throwing the fault " drive return timeout" anyone have any ideas what to check for this? It will be...

I have doors on my bays, being in Canada during winter, the glass windows fog up enough that's it's hard to see inside.

I am wanting to install a bay occupancy red and green light for my self serve bays. Im wondering what people are using for in bay sensors for a "bay in use" light outside of the bay. Or are you using the signal from your coin boxes to activate the light? Thanks!

I am looking for options to use as a fleet card that will work for my VPOS machines from nayax for my customers at my carwash. What do most owners use? The Nayax pre paid cards seem extremely complicated for what they are. What's your suggestions? Thanks!

Found the problem! My carpenter put a screw through my wire for the coin box🤦. Wax and my load wire ended up getting shorted together. Thankfully i had spare wires in the wire harness that were un harmed. Thanks for all the helpful suggestions!

Thanks, I have checked the wiring in the coin box and it all looks good. Nothing loose or touching eachother. I thought bad rotary aswell. So I switched it out and still no change.

Hey all! Yesterday I ran into a problem with one of my ss bays. For some reason it has started engaging high pressure when wax is selected. My wax is a low pressure system supplied from a flo jet. The electric solenoid for the bay after my flojet is opening for that bay. It is on a 10 position...