Recent content by Carwash_Guru

Can someone explain to me the difference of host based vs terminal based processing?

Mac, why can’t the extended height have a dryer? If it can have a H-beam, it should be able to have a dryer.

Greg, there are no stupid questions. If you have any just ask away.

10gpm injectors? I've had quite a bit of luck with the 5.5gpm, and reducing pressure on the pump to increase flow to lava arch.

It’s amazing how many do not realize it doesn’t need high pressure, especially if you brush with brush rinse. I’ve got a few people that run spot free and brush rinse with the brushes and they car literally comes out 100% rinsed. Occasionally it may hold soap around the area with windshield...

Greg, the wash programs can be edited to make the program faster. Seems like alot of people just run standard stuff.

Greg, the guide rail issue can be solved. Istobal offers a 3-inch guide rail as well as lighted guide rails which are substantially bigger in size. Only issue is if you have the wheel scrubber I believe the actual scrubber hits the guide rail. Normally if you decide to hook up the remote access...

Yes sir you can, that’s really those whole selling point of the 5 brush over the 3.

From what I’ve seen and learned yes, generally 1-2% is a good rate. Now it’s could be plenty more, that’s just the rates most use.

I'm pretty positive the way that its calculated would be by just setting up some equipment and take traffic count and assume that 1% of that daily traffic would use your wash. Now with that being said a good carwash thats only competition would be a C-store, I would project a higher number due...

Dear Greg, there is a way on the Istobal's to resolve not cleaning tag wells. The machine is equipped with an option to reverse the brush rotation on the back of the vehicle to help with that problem. As far as being under the spoiler in the back, that really is a hard place to get too so in my...

what king of maintenance and upgrades are you looking to do, maybe I can assist?

Kind of sounds like it’s either starting to have a battery go bad for the memory, or the controller might be starting to go.

You should be able to use the scrubber in either direction. Unfortunately the tilt is not a customizable feature, a 5 brush machine does both simultaneously.