Car Wash Man's latest activity
-
CCar Wash Man replied to the thread Kondor KL2 Carriage Jam Fault.Carwash is back up and running after repacking the bearing!! Thank you everyone for all your help, greatly appreciated
-
CCar Wash Man replied to the thread Kondor KL2 Carriage Jam Fault.No part number on the bearing at all :( We are going to try to repack the bearing.
-
CCar Wash Man replied to the thread Kondor KL2 Carriage Jam Fault.We have ours dissembled with the bearing out. We can't find a part number on it, so am checking with AutoZone to see exactly what type...
-
CThat's a solid axle both sides should be doing the same thing. Have you raised it up does it spin freely? It's just an idler axle it's...
-
CCar Wash Man replied to the thread Kondor KL2 Carriage Jam Fault.We diagnosed the problem after lifting the wheels. The bearing are getting old and having too much resistance to let the wheels spin...
-
CCar Wash Man replied to the thread Kondor KL2 Carriage Jam Fault.We found the cause! Attached is a video. The drive wheel is spinning regular but the prox wheel is just sliding. When I turn the prox...
-
CWhat makes you think they aren't making good contact? The whole weight of the carriage is on the rollers. Are the rollers spinning and...
-
CRaiseThe idler /prox axle in the air and make sure it rotates freely and you don't have any binding or bad bearings.
-
CCar Wash Man replied to the thread Kondor KL2 Carriage Jam Fault.Thanks for the tip, Ill give this a try and see what we can find this afternoon. Ill keep you updated!
-
CCar Wash Man replied to the thread Kondor KL2 Carriage Jam Fault.You can see that they are wearing unevenly on one side to the point where one roller is only making a contact on a quarter of the rail...
-
CWe operate a Kondor Kl2 at our location. We have been getting a Carriage Jam Fault the last day. After inspection we have determined...
-
CCar Wash Man replied to the thread Order of your Passes.Ill be honest we are in a pretty cheap area in Wisconsin. So getting rid of the lower clear coats and hot waxes would really turn away a...
-
CCurious as to how everyone has their wash passes set up? Also would you recommend we run our hot wax right before the ceramic, or is it...
-
CCar Wash Man replied to the thread Best Touchless Car Wash?.What is your average wash time for your different packages? Our changeover time is pretty instant on ours how we have it set up. We...
-
CCar Wash Man replied to the thread Best Touchless Car Wash?.Curious as to why you like the KL1 to the KL2? We have a KL2 and the overall wash speed is greatly increased with the extra arm. We...
