Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Buckeye Hydro's latest activity
-
Buckeye Hydro replied to the thread Reject water.If needed, take a look at the label on the solenoid to determine the voltage it runs on. Might be 110vAC, might be 220vAC, or might be... -
Buckeye Hydro replied to the thread Reject water.No - it should not be doing that. When commercial RO systems are "off" the current to the system is off. Without current, the normally...
-
Probably still bad check valve on a spot free line in one or more of your bays. High pressure making its way back and blowing out at the...
-
Buckeye Hydro replied to the thread Spot Free Issue.Typically the pipe that feeds the repressurization pump comes out of a bulkhead fitting installed near the bottom of a holding tank...
-
When you have no customers, and all reservoirs are full, go the the street meter and check for flow at the meter. There should be none...
