Thanks everyone for the feed back looks like I figure out the problem
The way the previous had the air hooked up to the product and Air lines
He had everything together so I made each line independently so I could better
I swapped out the 3 solenoids
We are back in business
Thanks again
It’s crazy cause all 3 flowjets are working
I haven’t checked for pinhole leaks yet.
Yes I also have a filter to separate water
I’ve thought about changing the solenoids
Hello everyone
I’m having a huge issue with my triple foam
For some reason it isn’t consistent
It’s goes in and out on foam and isn’t consistent
Yesterday I was contacted that the chemical coming from the gun was very very colored and staining my clients clothing
It will spit out foam then...
without pulling the trigger the gauge shows 200 to 400 psi and when i pull the trigger it just cavitates and the pressure don't move at all just gets lower and that is with the new pump installed my belts are tight on the motor and water pump.
Ive checked every possible thing. ive replaced both pumps and nothing now. i gave up for the night and going to try tomorrow morning. ive checked for debris and all in the lines. all it seems to do is cavitate.
Good evening
wanted to thank everyone for the advice and help on my issues at my carwash i am new to this so its a work in progress.
i have 2 bays for some odd reason i only have 200 to 400 psi when i usually run my pumps at about 800 psi
i have replaced both pumps with brand new GIANT P56W...
Hello everyone
I’d like to pick y’all’s brain a bit
I’m having issues with my triple shine I own a 6 bay car wash when I put the dial to triple shine
I barely get product and a lot of air and doesn’t really come out much
I’ve messed with the regulators increased product and more air and not...